Source: Worksafe New Zealand
This incident occurred on 26 November 2020. The operator was using the water blaster in a correct manner, and was experienced in its use. Regular maintenance checks and services had been carried out on the machine.
Background
This type of water blaster gun has a threaded bung (bolt) at the top, that is screwed into the brass body. While in use, the threaded bung fired out of the water blaster gun with a force that blew the operator backwards.
The operator suffered serious facial injuries and was hospitalised for three days.
During the investigation, it was made apparent that this type of incident is not a known risk within the hire industry or with the manufacturers of the equipment.
What’s the issue?
WorkSafe New Zealand engaged experts to understand why this incident occurred. After ruling out a malfunction of the machine itself, it was concluded that the brass body of the water blaster gun may have swelled during its working life. However, a definitive cause for the bung ejecting under pressure could not be established.
The experts strongly suggested that bungs should never be removed from water blaster guns to either repair or maintain them, as it can create a risk of cross threading. A cross threaded bung allows for the potential for it to
be ejected under pressure.
Our advice
WorkSafe recommends the use of a solid manifold gun (gun without a bung) to eliminate the risk presented by a bung.
If an existing high-pressure water blaster gun has a bung, instead of attempting to carry out maintenance on the bung, or replace certain parts, we recommend that you dispose of the entire water blaster gun and replace it with a new one.
There are several indicators to look out for that mean it may be time to replace the water blaster gun.
These include:
- when the equipment is in poor physical condition
- if the trigger mechanism is sticking or not functioning as it should
- if the gun itself is leaking water
- if the equipment has reached the end of its recommended lifespan provided by the manufacturer.
Where can you find more information?
You can find more information on this issue in this standard AS/NZ 4233.1:2013 High Pressure water (hydro) jetting systems Part 1: Guide for safe operation and maintenance.
Download
Safety alert: 3000 PSI water blaster gun – explosion
